Vconnect

Sequence P122 - 01

Stage 01 - Initial Position:

step 01 SLS connected to AS

Stage 00 - Initial Position:
Span P124-123 erected & all tendons are stressed
Span P124-123 on temporary bearings (20mm stroke)
Span P124-123 is clear (connection beams & PT brackets are removed on top slab)
Front Support (FS) & Rear Support (RS) loaded
FS & RS anchored to the bridge by 4 x Ø40mm bars
Auxiliary Support (AS) fully retracted (0mm stroke)
SLS connected to AS
Main Girder (MG) centered on each supports (ecc. = 0)
Longitudinal fixity pin engaged on RS


MEASURE UID: 04eb3bbd831a0fbea48e51a342c6ef7910cadee5
Description : RS height
Unit : Meter
MAX ACCEPTED VAL :5.567m 
MIN ACCEPTED VAL:5.367m
Read Vlaue :


MEASURE UID: 04eb3bbd831a0fbea48e51a342c6ef7910cadee5
Description : RS height 1
Unit : Meter
MAX ACCEPTED VAL :5.567m 
MIN ACCEPTED VAL:5.367m
Read Vlaue :


MEASURE UID: 04eb3bbd831a0fbea48e51a342c6ef7910cadee5
Description : RS height 2
Unit : Meter
MAX ACCEPTED VAL :5.567m 
MIN ACCEPTED VAL:5.367m
Read Vlaue :


MEASURE UID: 04eb3bbd831a0fbea48e51a342c6ef7910cadee5
Description : RS height 3
Unit : Meter
MAX ACCEPTED VAL :5.567m 
MIN ACCEPTED VAL:5.367m
Read Vlaue :


MEASURE UID: 04eb3bbd831a0fbea48e51a342c6ef7910cadee5
Description : Engage longitudinal fixity pin on AS
Unit :  1: Close 0: Open
MAX ACCEPTED VAL :1 
MIN ACCEPTED VAL:0
Read Vlaue :


MEASURE UID: 04eb3bbd831a0fbea48e51a342c6ef7910cadee5
Description : Load RS to minimum 30bar  
Unit : bar
MAX ACCEPTED VAL :60 
MIN ACCEPTED VAL:38
Read Vlaue :


MEASURE UID: 04eb3bbd831a0fbea48e51a342c6ef7910cadee5
Description : RS height 2
Unit : mm
MAX ACCEPTED VAL :12990 
MIN ACCEPTED VAL:8190
Read Vlaue :


MEASURE UID: 04eb3bbd831a0fbea48e51a342c6ef7910cadee5
Description : Longitudinal fixity  ANGLE ° 
Unit : Degree
MAX ACCEPTED VAL :5.000 
MIN ACCEPTED VAL:1.000
Read Vlaue :

Engage longitudinal fixity pin on FS Validated NOK

Auxiliary Support (AS) fully retracted (0mm stroke) Validated NOK

Span P124-123 on temporary bearings (20mm stroke) Validated NOK

Front Support (FS) & Rear Support (RS) loaded Validated NOK

FS & RS anchored to the bridge by 4 x Ø40mm bars Validated NOK

Main Girder (MG) centered on each supports (ecc. = 0) Validated NOK

Longitudinal fixity pin engaged on RS Validated NOK

Comments: